Finding drinking water in the wild is a vital challenge. When no source is available, making a solar water condenser becomes an essential survival solution. Using the heat of the sun and the natural moisture from the soil or plants, this simple device allows for the production of drinking water without any external energy.
In this article, discover how to build a solar condenser step by step with basic materials. A reliable and effective method for surviving even in the most arid environments.
Step 1: Choose a good location
Select a place sunny , where the soil is wet (dried riverbed, depression, etc.). The sun must beat down there. almost all day .
Step 2: Dig the main hole
Dig a hole funnel-shaped of approximately 1 meter in diameter And 60 cm deep .
Step 3: Prepare the central space
Make a depression in the center the hole to place one there clean container (bowl, gourd…). This container will be used to recover the condensed water .
Step 4: Install the tube (optional)
If you have a tube , tie it with a simple knot and place its end at the bottom of the container to be able to drink directly without dismantling the installation .
Step 5: Cover with a plastic tarp
Hold out a transparent plastic sheet above the hole. Cover the edges of earth to secure it well and prevent air leaks.
Step 6: Create the condensation cone
Place a small stone in the center from the tarpaulin: this will form a inverted cone whose tip is directed just above the container . L' condensed water will slide to this point and fall into the container.
Step 7: Add moisture sources
To produce more water, add to the bottom of the hole some fresh vegetation or wet clothes You can also create a gutter filled with polluted water around the hole (provided it does not touch the tarp) – the steam will be clean after condensation.
Step 8: Drink and store the water
You can drink the water in using the tube or by gently removing the container. Don't forget to plug the tube when you are not using it, to avoid evaporation .
Conclusion
The solar water condenser is a simple, ingenious, and effective survival method. It allows you to produce drinking water using only the heat of the sun and the available humidity in the environment : soil, vegetation or even wet fabrics.
Without the need for external energy, easy to make , silent and adaptable, this device can make a difference in the extreme situations . By mastering this technique right now, you significantly increase your chances of survival in the natural environment.
